Number Per Set
Part No. Description R S L C M Drawing No. Remarks
F24/2LAS Propstand Leg, Left Hand 1 1 - 1 - M.O.21
F24/2RAS Propstand Leg, Right Hand 1 1 - 1 - M.O.21
F25/7 Brake Pedal Lever 1 1 - 1 1 M.O.21
F25/9AS Brake Pedal Lever - - 1 - - M.O.62
F27 Brake Pedal Lever Nut 2 2 2 5 5 M.O.22, 64, 62
F28/1 Frame Spring Bolt (Front) 1 1 1 1 1 M.O.30
F28/2 Frame Spring Bolt (Rear) 1 1 1 1 1 M.O.22
F35/1 Seat Pivot and Horn (Bolt) 1 1 1 2 2 M.O.30 Bolt for Horn (Comet only)
F35/2 Pivot Bearing Hollow Spindle 1 1 1 1 1 M.O.22
F42 Pivot Bearing Dust Washer 2 2 2 2 2 M.O.22
F42/1 Pivot Bearing Dust Washer (Inner) 2 2 2 2 2 M.O.22
F45/1 Brake Rod 2 2 2 2 2 M.O.22
F47/3 Engine Mounting Bolt (Front) 1 1 1 1 1 M.O.30
F47/3AS Engine Mounting Bolt (Rear) 1 1 1 - - M.O.30
F47/4 Engine Mounting Bolt 1 1 1 1 1 Used with ET1/4AS and ET3/2 plus two ET154/1.
F48/5 Footrest Hanger Bolt - - - 1 1
F48/6 Gearbox Bolt (Lower) - - - 1 1 M.O.64
F48/7AS Gearbox Bolt (Upper) - - - 1 1 M.O.64
F51/4 Footrest Distance Piece (Left Hand) 1 1 - - - M.O.21
F51/5 Footrest Distance Piece (Right Hand) 1 1 - 2 2 M.O.21
F52/11 Footrest Hanger (Left Hand) 1 1 - - - M.O.21
F52/13 Footrest Hanger (Right Hand) - - - 1 1
F52/14 Footrest Hanger (Left Hand) - - - 1 1
F52/17 Footrest Hanger (Right Hand) 1 1 - - - M.O.21 Replaces F52/12
F55 Balance Beam 1 1 1 1 1 M.O.30, 63, 25
F56 Balance Beam Bush 1 1 1 1 1 M.O.30, 63, 25
F57/1 Seat Bolt Sleeve 1 1 1 1 1 M.O.30
F57/2 Frame Spring Bolt Sleeve 1 1 - - 1 M.O.30 Series 'D' machines only
F57/3 Frame Spring Bolt Sleeve 2 2 2 2 - Series 'C' machines only
F67 Cross Shaft Brake Arm 3 3 3 3 3 M.O.22
F69 Rear Stand Bolt 2 2 2 2 2 M.O.22
F72 Footrest Left Hand 2 2 - 1 1 M.O.21
F72/1 Footrest Right Hand 2 2 - 1 1 M.O.21
F72/2 Footrest - - - 1 1
F72/5 Footrest - - 2 - - M.O.62
F72/6 Kickstart Footpiece(Right Hand) 1 1 - - - M.O.09
F72/7 Kickstart Footpiece (Left Hand) 1 1 - - - M.O.09 OR pillion footrest left (Long)
F72/8 Pillion Footrest Right (Long) - - 2 1 -
F81 Tank Bolt (Front) 2 2 2 2 2 M.O.19
F83/1 Cylinder Head (Bracket Bush) 1 1 1 - - M.O.30
F84/0 Rear Frame Spring No. 0. S.W.G. 2 2 - - - M.O.22 1,000 c.c. sidecars only
F84/OAS Frame Spring Unit Assembly Complete 2 2 - - - M.O.22 1,000 c.c. sidecars only
F84/1 Rear Frame Spring No.1. S.W.G. 2 2 2 2 2 M.O.22 1,000 c.c. Solo and 500 c.c. Solo and Sidecar.
F84/1AS Frame Spring Unit Assembly Complete 2 2 2 2 2 M.O.22 1,000 c.c. Solo and 500 c.c. Solo and Sidecar.
F85/1 Headlamp Bracket Top 2 2 - 2 2 M.O.30, 63
F86/2 Headlamp Bracket Bottom 2 2 - 2 2 M.O.30, 63
F102 Gearbox Link - - - 1 1 M.O.64
F103 Pivot Bearing Spacer - - - 1 1 M.O.64
F106 Frame Tie - - - 1 1 M.O.64
F110 Frame Tie Ferrule - - - 1 1 M.O.64
F111 Battery Bracket - - - 1 1 M.O.64
F112 Distance Piece (Rear frame pivot) - - - 1 1
F113 Magneto Cowl - - - 1 - M.O.64
F117 Gearbox Distance Piece - - - 1 1 M.O.64
F118 Frame Tie Bolt - - - 1 1 M.O.64
F119 Battery Retaining Strip - - - 1 1 M.O.64
F120 Nut Plate - - - 1 1 M.O.64
F122 Magneto Cowl Bolt - - - 1 - M.O.64
F136AS Front Stand Assembly - - - - 1 M.O.30
F148 Rear Mudguard Blade - - - 1 1
F148/1 Rear Mudguard Blade (Valanced) - - - 1 1
FFAS Girdraulic Fork Assy complete with Armstrong Damper 1 1 1 1 - M.O.63
FF1 Head Clip 1 1 1 1 - M.O.63
FF2AS Girdraulic Fork Assembly complete with Armstrong Damper - - - 1 -
FF3AS Bottom Link Assembly 1 1 1 1 - M.O.63
FF4AS Top Link Assembly 1 1 1 1 - M.O.63
FF5 Bush Large 4 4 4 4 - M.O.63
FF6 Bush Small 6 6 6 6 - M.O.63
FF7 Front Fork Eccentric 2 2 2 2 - M.O.63
FF8 Trail Adjusting Stop 2 2 2 2 - M.O.63
FF9 Thrust Washer 2 2 2 2 - M.O.63
FF10 Thrust Cup 6 6 6 6 - M.O.63
FF11 Handlebar Clip 2 2 2 2 - M.O.63
FF12/2 Fork Spring (Outer) 2 2 2 2 - M.O.63 Replacing FF12
FF13 Fork Spring (Inner) 2 2 2 2 - M.O.63
FF14 Fork Spindle (Blade) 2 2 2 2 - M.O.63
FF15AS Spring Case (Outer) 2 2 2 2 - M.O.63
FF16AS Spring Case (Inner) 2 2 2 2 - M.O.63
FF17 Spring Case Pivot (Lower) 2 2 2 2 - M.O.63
FF18 Spindle Retainer 4 4 4 4 - M.O.63
FF19 Spindle Circlip 4 4 4 4 - M.O.63
FF20 Fork Spindle (Headclip) 1 1 1 1 - M.O.63
FF21 Steering Damper Nut 1 1 1 1 - M.O.63
FF22/1 Steering Damper Rod 1 1 1 1 - M.O.63 Standard from RC11937 onwards. Replacing FF22.
FF23 Headclip Nut 1 1 1 1 - M.O.63
FF24/1 Steering Damper Disc 1 1 1 - M.O.63 Standard from RC11937 onwards. Replacing FF24.
FF24/2 Steering Damper Disc 1 1 1 1 - M.O.63 Standard from RC11937 onwards. Replacing FF24.
FF25 Damper Detent Housing 1 1 1 1 - M.O.63
FF26 Damper Spring Plate 1 1 1 1 - M.O.63
FF27/2 Damper Anchor Plate 1 1 1 1 - M.O.63 Standard from RC11937 onwards. Replacing FF27.
FF28 Trail Stop Pin 2 2 2 2 - M.O.63
FF29 Fork Spindle - Crown Lug 1 1 1 1 - M.O.63
FF31 Handle Bar Cap 2 2 2 2 - M.O.63 Replacing B20.
FF32 Bridge Plate 1 1 1 1 - M.O.63
FF33AS Steering Column Assembly 1 1 1 1 - M.O.63
FF35 Excluder Ring & Felt 1 1 1 1 - M.O.63
FF36 Ring Plate 1 1 1 1 - M.O.63
FF37 Friction Disc 2 2 2 2 - M.O.63 Now used with FF24/1 FF24/2
FF40R Fork Blade (Right Hand) 1 1 1 1 - M.O.63
FF40L Fork Blade (Left Hand) 1 1 1 1 - M.O.63
FF41 Pad Bush 2 2 2 2 - M.O.63
FF42 Pad Bolt (Bottom) 2 2 2 2 - M.O.63
FF43 Pad Bolt (Top) - Short 1 1 1 1 - M.O.63
FF43/1 Pad Bolt (Top) - Long 1 1 1 1 - M.O.63
FF52 Pad Bolt  Link 2 2 2 2 - M.O.63
FF53 Spring Case Pivot (Top) 2 2 2 2 - M.O.63
FF56 Damper Pivot Sleeve (Bottom) 1 1 1 1 - M.O.63
FF57/1 Damper Eye Bolt 2 2 2 2 - M.O.63 Replaces FF57 for use with Armstrong Damper.
FF58 Steering Damper Locknut 1 1 1 1 - M.O.63
FF67 Shim .003" M.O.63 As required
FF67/1 Shim .005" M.O.63 As required
FF67/2 Shim .010" M.O.63 As required
FF68 Mudguard Lug 2 2 2 2 - M.O.63
FF69 Speedometer Bracket (Top) 1 - 1 1 - M.O.25 For use with 120 M.P.H. and 180 M.P.H. Speedometers.
FF69/1 Speedometer Bracket (Bottom) 1 - 1 1 - M.O.25 For Use with 120 M.P.H. and 180 M.P.H. Speedometers.
FF69/2 Speedometer Bracket 5" type - 1 - - - For use with 150 M-P-H Speedometer.
FF70 Damper Pivot (Top) 1 1 1 1 -
FF71 Damper Sleeve Washer (Felt) 2 2 2 2 - M.O.63
FF72 Handlebar Clip Stud 4 4 2 4 - M.O.63
FF72/1 Handlebar Clip Stud (Long) - - 2 - - M.O.63 For use with Revolution Counter (Bracket)
FF74/1 Return Spring 1 1 - 1 - )For illustrations and fitting instructions see Riders Handbook
FF75/1 Balance Beam Stop 1 1 1 1 - )For illustrations and fitting instructions see Riders Handbook
FT1/4AS Upper Frame Member, complete with Headlug, Headrace Cups, Chain Oiler Assembly, Sleeves and Bushes, but less oil unions & Filler Cap. 1 1 1 1 1 M.O.30, 63 Replacing FT1/2AS
FT3 Cylinder Head Bracket (Rear) 1 1 1 - - M.O.30 Use two per with FT1/2AS as shown on M.O.30.
FT3/2 Cylinder Head Bracket (Front) 1 1 1 1 - M.O.30 Only used with FT1/4AS
FT5 Pivot Bearing Plate (Left Hand) 1 1 1 - - M.O.32.
FT6/2AS Rear Fork Assembly (Complete) 1 1 1 1 1 M.O.22 Replaces FT6AS. With two FT117 bushes.
FT13/1AS Rear Stand Assembly (Complete) 1 1 1 1 1 M.O.22
FT17AS Seat Stay 2 2 2 2 2 M.O.22 Complete assembly, see ET94AS/1
FT22AS Lifting Handle 1 1 - 1 1 M.O.37
FT22/4 Rear Guard Stay (inner) 2 2 2 2 2 M.O.37
FT23/2RAS Front Engine Plate (Right Hand) 1 1 - 1 - M.O.21 Shown on M.O.21 as FT23/2.
FT23/2LAS Front Engine Plate (Left Hand) 1 1 - 1 - M.O.21 Shown on M.O.21 as FT23/2.
FT29/1AS Battery Bracket 1 1 - - - M.O.21
FT30AS Battery Strap Assembly 1 1 - 1 1 M.O.21
FT31 Battery Holding Bolt 1 1 - 1 1 M.O.21
FT33 Pivot Bearing Spindle 1 1 1 1 1 M.O.32, 64
FT40/2 Front Stand Pivot 1 1 - - - M.O.21
FT40/3 Front Stand Pivot - - - 1 - M.O.21
FT41/1 Stand Spring Anchor 3 3 - 3 - M.O.21
FT41/2 Bracket Spring Anchor 2 2 - 1 - M.O.21
FT41/3 Kickstart Spring Anchor (Quadrant) 1 1 - - - M.O.10
FT41/4 Kickstart Spring Anchor 1 1 - - - M.O.10
FT44 Brake Torque Arm 2 2 - 2 2 M.O.22
FT44/1 Brake Torque Arm - - 2 - - M.O.62
FT48/2 Footrest Hanger Bolt 1 1 1 - - M.O.21
FT66/1 Brake Cross Shaft 1 1 1 1 1 M.O.22
FT80 Tank Mounting Bush 2 2 2 2 2 M.O.18
FT84 Kickstart Footpiece Pivot, Long 5 5 - 2 2 M.O.21, 009
FT84/1 Kickstart Footpiece Pivot, Short 2 2 - - - M.O.21
FT93 Pillion Footrest Bracket 2 2 - 2 2 M.O.21
FT94AS/1 Seat Stay Assembly (Complete) 2 2 2 2 2 M.O.22
FT95 Damper Drum 4 4 4 4 4 M.O.22
FT96AS Damper Knob Assembly 2 2 2 2 2 M.O.22
FT98 Damper Screw 2 2 2 2 2 M.O.22
FT99 Footpiece Spring 5 5 2 2 2 M.O.21, 62
FT100 Brake Pedal Footpiece 1 1 1 1 1 M.O.21, 62
FT101 Stop Anchor Pin 1 1 1 1 1 M.O.21
FT102AS Brake Cable (Rear) 1 1 1 - - M.O.21
FT102/1AS Brake Cable (Rear) - - - 1 1
FT103 Brake Pedal Stop Anchor 1 1 1 1 1 M.O.21
FT104 Brake Arm Spacer 1 1 1 1 1 M.O.22
FT105 Brake Cable Trunnion 1 1 1 1 1 M.O.22
FT106 Pillion Footrest Support Plate 1 1 - 2 2 M.O.21, 36
FT106/2 Footrest Support Flats - - 1 - - M.O.62
FT107 Pillion Footrest Support Distance Piece (Left Hand) 1 1 1 - - M.O.36, 62
FT108 Pillion Footrest Support Plate  (Right Hand) 1 1 - - - M.O.21
FT108/1 Footrest Support Plate (Right Hand) - - 1 - - M.O.62
FT109 Pillion Footrest Support Distance Piece (Right Hand) 1 1 1 1 1 M.O.35, 62
FT109/1 Pillion Rest Support Distance Piece(small) 1 1 - 1 1 M.O.35, 41
FT111 Seat Stay End 2 2 2 2 2 M.O.22
FT115/1 Rear Stand Screw 1 1 1 1 1 M.O.37 Replacing FT115AS
FT117 Porous Bronze Bush 2 2 2 2 2 M.O.22
FT118/AS Front Stand Bracket Assembly with Spring Anchors. 1 1 - - - M.O.21
FT118/1AS Front Stand Bracket Assembly with Spring Anchors. - - - 1 -
FT119 Prop Stand Spring 2 2 - - - M.O.21
FT120 Prop Stand Bracket Spring 1 1 - 1 - M.O.21
FT122 Prop Stand Pivot 2 2 - 2 - M.O.21
FT124 Headrace Cone 2 2 - 2 2 M.O.30, 63
FT127 Steering Damper Stop 1 1 1 1 1 M.O.63, 30
FT128 Headrace Cup 2 2 2 2 2 M.O.30, 63
FT129 Damper Clamp Bolt 2 2 2 2 2 M.O.22
FT130 Battery Thumb Nut 1 1 - 1 1 M.O.21
FT130AS Battery Nut Assembly 1 1 - 1 1 M.O.21 Includes ET31, FT130, 91.
FT132 Battery Bolt Anchor 1 1 - - - M.O.21
FT135 Damper Lining 2 2 2 2 2 M.O.22
FT136AS Front Guard Stay (Short) 1 1 1 1 1 M.O.30, 37
FT136/1AS Front Guard Stay    (Short) For valanced blade
FT137AS Front Guard Stay    (Long) 1 1 - 1 1 M.O.30, 37
FT137/1AS Front Guard Stay    (Long) For valanced blade
FT144 Brake Cable Abutment - - - 1 1 M.O.22 Used on FT6AS only
FT144/2 Brake Cable Abutment 1 1 1 1 1 M.O.22
FT145 Rear Flap Hinge 1 1 - 1 1 M.O.37
FT145/1 Rear Blade Hinge 1 1 - 1 1 M.O.37
FT146AS Chain Adjuster Assembly complete 2 2 - 2 2 M.O.22
FT148 Rear Guard Blade (Alloy) 1 1 - - - M.O.37
FT148/1 Rear Guard Blade (Valanced - Steel) 1 1 - - - M.O.37 Optional Alternative.
FT148/3 Rear Guard Blade - - 1 - - M.O.37
FT149 Rear Guard Flap (Alloy) 1 1 - 1 1 M.O.37
FT149/1 Rear Guard Flap (Valanced - Steel) 1 1 - - - Optional alternative.
FT150 Front Guard Blade (Alloy) 1 1 - 1 1 M.O.30
FT150/1 Front Guard Blade (Valanced - Steel) 1 1 - - - Optional alternative.
FT150/2 Front Guard Blade (Racing - Alloy) - - 1 - -
FT151/1 Flap Reinforcement (Inner) 1 1 - 1 1 M.O.37
FT151/2 Clip Screw Steady Plate 1 1 - 1 1 M.O.37
FT152 Blade Reinforcement 1 1 1 1 1 M.O.37
FT153 Seat Bolt Sleeve 2 2 2 2 2 M.O.22
FT154 Mudguard Hinge Nut 1 1 - 1 1 M.O.37
FT155 Mudguard Hinge Stud 3 3 - 2 2 M.O.37, 32
FT156/1 Hinge Bolt Nut 1 1 - 1 1 M.O.37 Replacing FT156AS as shown on M.O.37.
FT157 Spring: Brake Cable 1 1 1 1 1 M.O.22
FT158 Footrest Rubber 4 4 - 4 4 M.O.21
FT161/1 Footrest Hanger Nut 2 2 - 2 2 M.O.21
FT162 Torque A= Spring 2 2 2 2 2 M.O.22
FT163 Magneto Cowl 1 - - - - M.O.32.
FT163/1 Magneto Cowl - 1 - - - M.O.32.
FT166 Torque Arm Clip 2 2 2 2 2 M.O.22
FT167 Balance Weight Bolt 4 4 4 - -
FT168 Propstand Pivot Nut 2 2 - 2 - M.O.21
FT170 Side Car Rear Mounting Bracket
FT172/1 Tank Bolt (Rear) 2 2 2 2 2 M.O.19
FT173 Tank Rubber (Lower) 1 1 1 1 1 M.O.19
FT173/1 Tank Rubber (Upper) 1 1 1 1 1 M.O.19
FT175 Horn Distance Piece 1 1 - - - M.O.36
FT175/1 Horn Distance Piece - - - 2 2 Use with sidecar only
FT175/2 Horn Distance Piece 1 1 - 1 1 Use with sidecar only
FT177 Stoplight Spring Anchor 1 1 - 1 1 M.O.22
FT179/1 Speedometer Bracket 5" - 1 - - - M.O.30 For use with Girder Forks only
FT182 Balance Weight - 2 oz. Wheels should be re-balanced after tyre change or even after tyre repair, unless tyre replaced as before.
FT182/1 Balance Weight - 3 oz. 2 2 2 - - M.O.01 Wheels should be re-balanced after tyre change or even after tyre repair, unless tyre replaced as before.
FT182/2 Balance Weight - 6 oz. Wheels should be re-balanced after tyre change or even after tyre repair, unless tyre replaced as before.
FT182/3 Balance Weight - 7 oz. Wheels should be re-balanced after tyre change or even after tyre repair, unless tyre replaced as before.
FT183 Cable Clip 2 2 2 - - M.O.25
FT184 Cable Clip Screw 2 2 2 - - M.O.25
FT185 Distance Piece Peg 2 2 - 2 2 M.O.21
FT201 Hanger Accommodation Washer 2 2 - 2 2 M.O.21
FT202 Footpiece Plug 1 1 - - - M.O.09
FT203 Mudguard Stay Bolt 1 1 - 1 1 M.O.37
FT204 Stop Light Switch Spacer 1 1 - 1 1 M.O.36
FT218 Fork Spindle (Top) 2 2 - - - M.O.30 Series 'B' Girder Forks
FT219 Fork Spindle (Bottom) 2 2 - - 2 M.O.30 Series 'B' Girder Forks
FT221R Friction Disc (Right Hand) 2 2 - - 2 M.O.30
FT221L Friction Disc (Left Hand) 2 2 - - 2 M.O.30
FT226/1 Fork Spindle Bush (Bottom) 4 4 - - 4 M.O.30 Use ET64
FT228 Fork Spindle Bush (Top) 4 4 - - 4 M.O.30
FT233 Damper Spring Blade 1 1 - - 1 M.O.30
FT237 Mudguard Lug 2 2 - - 2 M.O.30
FT252 Gear Lever Pivot Sleeve - - 1 - - M.O.62
FT252/1 Brake Pedal Pivot Sleeve - - 1 - - M.O.62
FT253 Gear Lever Pivot - - 1 - - M.O.62
FT253/1 Brake Pedal Pivot - - 1 - - M.O.62
FT256AS Adjusting Tube - - 1 - - M.O.62
FT259 Yoke Pin - - 1 - - M.O.62
FT260 Brake Lever Yoke - - 1 - - M.O.62
FT261 Revolution Counter Bracket - - 1 - - M.O.62
FT270 Mudguard Stay Spacer - - 2 - - M.O.62
FT271 Hollow Dowel - - 1 - - M.O.62
FT273AS Crash Bar Assembly (Complete) 1 1 - - - Black enamelled
FT273AS/1 Crash Bar Assembly (Complete) - - - 1 - Black enamelled
FT273/1AS Crash Bar Assembly (Complete) 1 1 - - - Chromium plated
FT273/3AS Crash Bar Assembly (Complete) - - - 1 - Chromium Plated
F.W.1 Front Wheel complete with all Brake Gear, Balance Weights, Security Bolts. W.M.1 x 20" Rim. 1 - - - - For 3.00 x 20" tyre. No solid axle.
F.W.2 Front Wheel complete with all Brake Gear. W.M.1 x 20" Rim. - - - 1 1 For 3.00 x 20" Tyre. Touring models only. No solid axle.
F.W.3 Front Wheel complete, with all Brake Gear, Balance Weights, Security Bolts, W.M.1 x 20" Rim. Ribbed Brake Drums - 1 - - - For 3.00 x 20" Tyre. No solid axle.
F.W.4 Front Wheel complete, with all Brake Gear, Balance Weights, Security Bolts, W.M.2 x 19" Rim. 1 - - - - For 3.50 x 19" Tyre. Optional size. No solid axle.
F.W.5 Front Wheel complete with all Brake Gear, Balance Weights, Security Bolts. W.M.2 x 19" Rim. Ribbed Brake Drums. - 1 - - - For 3.50 x 19" Tyre. Optional size. No solid axle.
F.W.6 Racing Front Wheel, complete with all Brake Gear, Balance Weights, Security Bolts, W.M.1 x 21". Alloy Rim. - - - - - For 3.00 x 21" Racing Tyre. No solid axle.